Filter
Top Products
SELECTABLE DRIVER SETTINGS-
REMOTE CONTROL
HIGHWAY MODE
When Calibre is in HIGHWAY mode, it will provide
full sensitivity and warnings to all FCC allocated
police radar bands and technology. Upon selecting
this mode, Calibre will provide a voice confirmation
that states, "HIGHWAY."
ADVANCED CITY MODE
When Calibre is in CITY mode, it will virtually
eliminate false alerts by removing all X-band radar
signal warnings, the most common source of
non-police radar signals. This mode also engages a
filter system that is designed to reduce other weaker
non-police signals while remaining on total top alert
for police radar. Upon selecting this mode, Calibre
will provide a voice confirmation that states, "CITY."
OFF MODE
When Calibre is in OFF mode, the system is turned
off and it will not receive or report radar signals.
Upon selecting this mode, Calibre will provide a
voice confirmation that states, "K40 OFF." Calibre
will stay in the OFF mode, even after restarting your
vehicle, until you place the system in the CITY or
HIGHWAY mode through the Remote Control.
VOICE MODE
When Calibre is in VOICE mode, each radar warning
is accompanied by a voice alert indicating what
direction the signal is coming from, front or rear, and
the band of radar that was detected (e.g. "FRONT KA
BAND" or "REAR K BAND"). On models that only
feature a front radar receiver, only the band identifi-
cation will be stated. Upon selecting this mode,
Calibre will provide a voice confirmation that states,
"VOICE MODE."
TONE MODE
When Calibre is in TONE mode, each radar warning
is accompanied by a unique tone sound for front or
rear alerts. On models that feature a single radar
receiver, tones are the same regardless of the
direction of the signal. Upon selecting this mode,
Calibre will provide a voice confirmation that states,
"TONE MODE."
HIGH VOLUME
When Calibre is in HIGH mode, the audio volume
will be at its loudest setting. This mode is ideal for
convertibles, vehicles with loud audio systems, or
those with hearing difficulty. Upon selecting this
mode, Calibre will provide a voice confirmation that
states, "VOLUME HIGH."
LOW VOLUME
When Calibre is in LOW mode, the audio volume
will be at its quietest setting. Upon selecting this
mode, Calibre will provide a voice confirmation that
states, "VOLUME LOW."
MUTE VOLUME / LIGHTS ONLY MODE
When Calibre is in MUTE mode, all radar and laser
warning audio will be turned off. When radar or laser
is detected, only visual light warnings are provided.
Upon selecting this mode, Calibre will provide a
voice confirmation that states, "LIGHTS ONLY."
Congratulations! Your new Calibre Remote Radar &
Laser System is the world's finest total protection
system against speeding tickets. Please take a moment
to fully review this Owner's Guide to acquaint
yourself with the controls and features of this
revolutionary technology.
INITIAL WAKE-UP SEQUENCE
Your K40 Calibre Remote Radar & Laser System is
designed to turn on with the ignition. After starting
your vehicle, Calibre will flash both of the blue
warning LED lights three times in sequence (models
with one radar receiver have only one blue LED),
followed by three rapid audio beeps, letting you
know the system is operational. In Mute / Lights Only
mode, only the lights will flash during the wake-up
sequence. There are no audio beeps.
OPERATING THE
REMOTE CONTROL
IMPORTANT:
After starting the vehicle, please allow 30
seconds for your wireless network to connect before
changing the settings.
There are eight driver selectable settings on the
Remote Control. The three buttons located at the
top will allow you to adjust the settings for your
Calibre system. The left button allows you to adjust
the volume to HIGH, LOW, or full time MUTE. The
center button enables you to select either VOICE or
TONE alerts. And the right button lets you place
Calibre in CITY or HIGHWAY mode, or turn the
system OFF.
To change a setting, simply press and release any of
the three selector buttons to activate the Remote
Control. Once activated, the status LEDs on the
Remote Control will illuminate. While the LEDs are
illuminated, you can move between the settings by
pressing the appropriate selector button.
NOTE:
Duracell
®
AAAA batteries are the only approved
battery replacements for the Remote Control. If you
need to change the batteries, simply remove the back
panel of the Remote Control by inserting a small coin or
flat blade screwdriver into the slot that separates the two
pieces of the Remote Control housing (located on the
bottom side of the remote). Gently pull the pieces apart.
Press to select between
Highway or Advanced
City modes or turn
the system Off.
Press to select between Tone or Voice modes.
Press to select between
High or Low volume
modes or activate
full time Mute.
Modifications to the Calibre system not expressly approved by the
manufacturer could void the user's FCC granted authority to operate
the equipment.
K40 RECOMMENDS REPLACING THE REMOTE
CONTROL BATTERIES AT LEAST ONCE A YEAR.