Filter
Top Products
Black plate (18,1)
Cadillac STS Owner Manual - 2011
Engaging Adaptive Cruise Control With the
Set Button
{
WARNING:
If you operate Adaptive Cruise Control without
your Head-up Display (HUD) properly adjusted,
your Adaptive Cruise Control settings may not be
visible. You could forget your settings and be
startled by Adaptive Cruise Control response
and even lose control. Keep your HUD on and
properly adjusted when using Adaptive Cruise
Control.
If the cruise button is on when not in use, it could get
bumped and go into cruise when not desired. Keep the
cruise control switch off when cruise is not being used.
The set speed is selected by the driver. This is the
speed you will travel if there is no vehicle detected in
your path.
To set Adaptive Cruise Control, do the following:
1. Make sure the Head-Up Display (HUD) is on and
properly adjusted. You cannot engage Adaptive
Cruise Control unless the HUD is on. See Head-Up
Display (HUD)
on page 4‑38
for more information.
2. Move the switch to on.
3. Get up to the desired speed.
4. Press
T at the end of the lever and release it.
5. Take your foot off the accelerator pedal.
Once Adaptive Cruise Control is set, it might
immediately apply the brakes if it detects a vehicle
ahead that is too close or moving slower than your
vehicle.
4-18