Cadillac 2011 Escalade Hybrid Automobile User Manual


 
Black plate (1,1)
Cadillac Escalade Hybrid - 2011
In Brief 1-1
In Brief
Initial Drive Information
Transmission . .......... ....... 1-1
Four-Wheel Drive .... . . . . . . . . . 1-1
Hybrid Features
High Voltage Safety
Information . .... . . .. . . . .. . . . . 1-2
Fuel Economy Gauge .... . . . . . 1-3
Automatic Engine Start/Stop
Feature ... ... .... ... ... ... ... 1-3
Regenerative Braking .... . . . . . 1-4
Battery .... ... .. .. .. ... .. .. .. .. 1-5
Service .. ... . . . .. . .. . . . .. . . .. . 1-5
Performance and Maintenance
Tire Sealant and
Compressor Kit .... .. .. .. .. .. 1-5
Initial Drive
Information
Transmission
Range Selection Mode
The Range Selection Mode switch
is located on the shift lever. To
enable the Range Selection feature,
move the column shift lever to the M
(Manual) position. The current range
will appear next to the M. This is the
highest attainable range with all
lower gears accessible. As an
example, when 3 (Third) gear is
selected, 1 (First) through 3 (Third)
gears are available.
Press the plus/minus buttons,
located on the steering column shift
lever, to select the desired range of
gears for current driving conditions.
See Automatic Transmission
Operation in the owner manual.
Cruise control can be used while the
vehicle is in Range Selection Mode.
See Manual Mode on page 910.
Four-Wheel Drive
If the vehicle has four-wheel drive,
you can send the engine's driving
power to all four wheels for extra
traction. Read the following before
using four-wheel drive.