The Ignition is On and the HUD Image
Cannot Be Seen
Check to see if:
• The HUD unit is covered.
• The brightness is adjusted properly.
• The HUD display is adjusted to the proper height.
• Ambient light in the direction the vehicle is facing
is low.
• A fuse is blown. See Fuses and Circuit Breakers on
page 5-123.
The windshield is part of the HUD system.
See Windshield Replacement on page 5-52.
The following messages may appear in the HUD:
SPEED ALERT
When the Speed Advisor feature is turned on,
HUD displays either the posted or advisory speed as
determined by the information on the map disc in
the navigation system. To turn the Speed Advisor on or
off, see DIC Operation and Displays on page 3-72.
The Speed Advisor can be set to show a speed alert
when the vehicle speed exceeds the speed alert limit
as set in the DIC menu. Depending on the level of
the HUD on the vehicle, your HUD may work like either
of the following:
• The HUD speedometer will turn red when the
vehicle speed exceeds the speed alert limit.
When the vehicle speed is at or below the alert limit
and above the posted speed or advisory speed,
the speedometer turns yellow. If the Speed
Alert setting in the DIC is set to AT LIMIT, the
speedometer will not turn yellow. When the vehicle
speed is at or below the posted speed or advisory
speed, the speedometer remains green.
• The HUD speedometer will turn yellow when the
vehicle speed exceeds the speed alert limit.
When the vehicle speed is at or below the alert
limit, the speedometer remains green.
Posted Speed
Advisory Speed
3-45