Filter
Top Products
CD Messages
If the CD ejects, it could be for one of the following
reasons:
• The CD player is very hot. When the temperature
returns to normal, the CD should play.
• The road is very rough. When the road becomes
smoother, the CD should play.
• The CD is dirty, scratched, wet, or upside down.
• The air is very humid. If so, wait about an hour and
try again.
• The format of the CD might not be compatible. See
Using an MP3 on page 3-111 later in this section.
• A problem may have occurred while burning the CD.
• The label could be caught in the CD player.
If the CD is not playing correctly for any other reason,
try a known good CD.
If any error occurs repeatedly or if an error cannot
be corrected, contact your dealer/retailer. If the radio
displays an error message, write it down and provide it
to your dealer/retailer when reporting the problem.
Configurable Radio Display Keys
The four keys located on each side of the radio display
can be configured to adjust the radio features and other
non-radio related features. The configurable keys can be
changed at any time. Once a feature is programmed to a
key, the feature does not display when programming the
remaining configurable keys.
To program the configurable radio display keys:
1. Press
w to enter the main menu.
2. Turn
w until SETUP displays.
3. Press
w to enter into SETUP.
4. Turn
w until CONFIGURE DISPLAY KEYS
displays.
5. Press
w to enter into CONFIGURE
DISPLAY KEYS.
6. Turn and then press
w to select the
configurable key to be changed. The currently
assigned feature displays.
7. Turn
w to find the feature that will be stored to
the key.
8. Press
w to select the desired feature. The
display updates by showing the symbol of the
feature selected next to the configurable key.
9. Repeat the previous steps for each configurable key.
3-110