However, the operating range may be less while the
vehicle is running. As a result, you may need to
be closer to your vehicle to turn it off than you were to
start it.
There are other conditions which can affect the
performance of the transmitter. See Remote Keyless
Entry (RKE) System on page 2-4.
The following functions may be available if your vehicle
has the RKE system:
Q(Lock): Press Q to lock all the doors.
If enabled through the Driver Information Center (DIC),
the turn signal lamps will flash once to indicate locking
has occurred. If enabled through the DIC, the horn will
chirp when
Q is pressed again within three seconds of
the previous press of the lock button. See DIC Vehicle
Customization on page 3-61 for additional information.
Pressing
Q will arm the content theft-deterrent system.
See Content Theft-Deterrent on page 2-21.
" (Unlock): Press " to unlock the driver’s door. If " is
pressed again within three seconds, all remaining
doors will unlock.
If it is dark enough outside, your interior lamps will come
on and stay on for 20 seconds or until the ignition is
turned on. If enabled through the DIC, the turn signal
lamps will flash twice to indicate unlocking has occurred.
See DIC Vehicle Customization on page 3-61. If enabled
through the DIC, the exterior lights will turn on briefly if it
is dark enough outside. See “APPROACH LIGHTING”
under DIC Vehicle Customization on page 3-61.
Pressing
" on the RKE transmitter will disarm the content
theft-deterrent system. See Content Theft-Deterrent on
page 2-21.
With Remote Start and
Power Liftgate and
Liftglass (Without
Remote Start Similar)
2-5