Bushnell 360310BG GPS Receiver User Manual


 
5
Fig. 8
Fig. 7
Fig. 9
8
flash in the center of the display.
You can use the five icons (and up to 5 numbers) to
mark five different locations of any kind (your car, tent,
scenic area, etc.). Be sure you select a different icon or
# to store each new location. If you hold down MARK
with a previously used location icon still selected, you
will replace that one with your current location.
To expand or restrict the number of “extra” locations
(numbers from 1 to 5) that are available, press SETUP
(4) three times until the location arrow on the lower
right is highlighted. Press MARK (2), then use the
TRIP/DATA or SETUP buttons to decrease or increase
the number below the arrow (Fig. 6). Press the MARK
button to confirm and return to the Setup screen.
OTHER SCREENS
Press TRIP (3) from the “Target” location icon screen
to view the temperature and altitude at your current
location (Fig. 7).
Press TRIP three more times to view the Compass
screen, displaying the Latitude and Longitude of
your current location, and a digital compass display
including your heading (direction of travel) in degrees
(Fig. 8).
AUTO POWER OFF/BACKLIGHT
Power automatically turns off after 10 minutes if no
buttons have been pressed (except in Trip mode,
described next). HOLD POWER down to turn the unit
off manually.
Press the MARK button to turn the display backlight
on. It automatically turns off after 30 seconds.
Fig. 6