Bushnell 360210 GPS Receiver User Manual


 
6
7. Select an icon you want to use. While you are physically at the location you want to mark (i.e. your campsite), press
and hold the MARK button until you see the display change as shown at right above, confirming the location is stored.
Note: it does not matter which direction you face when marking a location.
Hold MARK
Stand at the location you want
to mark as “Home”
Location marked (memorized)-you are
“0” yards from “Home”
8. Turn POWER off or proceed to another location you want to mark. Be sure to select a different icon before marking
a new location. If you hold down MARK with a previously used location icon still selected, you will replace that one
with your current location.
To mark another location:
1-Select another icon (press POWER)
2- Go to the new location, then
MARK the location (hold MARK)
POWER
1
MARK
2