Bush Hog TH420 Automobile User Manual


 
Tires
Tire Tread Depth
Always replace tires when tread depth is worn to 1/8” (.3 cm) or less.
Wheel Lug Nuts
Inspect the lug nuts occasionally for tightness or missing nuts.
Tighten to 35 ft. lbs.
Wheel Removal
1. Stop the engine, place the transmission in gear and engage the
parking brake.
2. Loosen the lug nuts slightly.
WARNING
OPERATING YOUR VEHICLE WITH WORN TIRES WILL
INCREASE THE POSSIBILITY OF SKIDDING, LOSS OF CON-
TROL AND AN ACCIDENT, WHICH COULD RESULT IN
SERIOUS INJURY OR DEATH. ALWAYS REPLACE TIRES
WHEN THE TREAD DEPTH MEASURES 1/8” (.3 CM) OR
LESS.
IMPROPER TIRE INFLATION OR THE USE OF NON-STAN-
DARD SIZE OR TYPE TIRES MAY ADVERSELY AFFECT
VEHICLE HANDLING, WHICH COULD RESULT IN VEHICLE
DAMAGE OR PERSONAL INJURY. ALWAYS MAINTAIN
PROPER TIRE PRESSURE. WHEN REPLACING TIRES,
ALWAYS USE THE ORIGINAL EQUIPMENT SIZE AND TYPE.
WARNING
OPERATING YOUR VEHICLE WITH IMPROPERLY
INSTALLED WHEELS WILL AFFECT VEHICLE HAN-
DLING AND COULD CAUSE AN ACCIDENT RESULTING
IN SERIOUS INJURY OR DEATH. MAKE CERTAIN
WHEELS ARE INSTALLED PROPERLY.
64