Filter
Top Products
9-38 Driving and Operating
The following illustration shows the
field of view that the camera
provides.
When the System Does Not
Seem To Work Properly
The rear vision camera system
might not work properly or display a
clear image if:
.
The RVC is turned off. See
“Turning the Rear Camera
System On or Off” earlier in
this section.
.
It is dark.
.
The sun or the beam of
headlights is shining directly into
the camera lens.
.
Ice, snow, mud, or anything else
builds up on the camera lens.
Clean the lens, rinse it with
water, and wipe it with a soft
cloth.
.
The back of the vehicle is in an
accident, the position and
mounting angle of the camera
can change or the camera can
be affected. Be sure to have the
camera and its position and
mounting angle checked at your
dealer/retailer.
.
There are extreme temperature
changes.
The rear vision camera system
display in the rearview mirror may
turn off or not appear as expected
due to one of the following
conditions. If this occurs the left
indicator light on the mirror will
flash.
.
A slow flash may indicate a loss
of video signal, or no video
signal present during the
reverse cycle.