Filter
Top Products
2.1 Detaching the arm/stand
(for VESA wall mount)
VESA wall mount.
To detach the arm/stand:
2. Remove the arm cover
3. Have the front of the monitor face down on a table
4. Detach the arm from the monitor.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the stand of the monitor when you remove the screws.
2-1
The detachable stand of the VK266/VW266 Series LCD monitor is specially designed for
ASUS LCD Monitor VK266/VW266 Series
1.
3 screws
Remove the back cover . by hand carefully
. by hand carefully
. Use a screwdriver to
carefully
remove the three screws on the stand of the monitor as the below drawing shows.
The VESA wall mount kit (100 mm x 100 mm) is purchased separately.
For use only with UL Listed Wall Mount Bracket with minimum weight/load 7.9 Kg
(Screw size: 4mm x 12 mm)