Filter
Top Products
4
Installation Manual P/N 01 29 0 393 657
14. Insert iPod cable (1) through hole in glovebox
as indicated.
Note: Split grommet as shown before placing
around iPod cable in order to prevent damage
to cable.
15. Split grommet (1) as indicated (2) and insert
grommet through hole in glovebox wall.
16. The flat iPod connector (1) should be located
in the glovebox and the 8-pin DIN connector
(2) for the adapter box should be routed
through the center console to a location
behind the radio.
17. Re-connect glovebox vent tube.
18. Re-install glovebox.
Caution: Check for bent pins on adapter
cables before attaching to iPod adapter. If
pins are damaged carefully bend them back
into position with a small screwdriver.
19. Slide iPod adaptor fully into foam padding
tube (1).
20. Connect white “iPod” adapter cable (2) and
black “Radio” adapter cable (3) to iPod
adapter, making sure to connect cables in
their proper location.