BMW Motorrad zmo GPS Receiver User Manual


 
44 BMW Motorrad zūmo Owner’s Manual
aPPendix
Charging the zūmo
1. Connect the power cable to a mount
and a power source.
2. Place the zūmo in the mount, and ip
the lever down.
OR
1. Charge the zūmo with the AC power
cable. Plug the small end of the AC
power cable into the mini-USB port
on the bottom of the zūmo.
2. Plug the other end into a standard
wall outlet.
Resetting the zūmo
If your unit freezes up, press and hold
and press .
Calibrating the Screen
If the touch screen is not responding
properly, calibrate the touch screen.
Turn the unit off. Press and hold for
about one minute until the calibration
screen appears. Follow the on-screen
instructions.
Updating the zūmopdating the zūmo
Software
1. Go to www.garmin.com/products/
webupdater to download the
WebUpdater program to your
computer.
2. Connect the zūmo to your computer
using the mini-USB cable.
Mn-USB port for AC power, USB Mass
Storage mode, and updatng software
3. Run WebUpdater, and follow the
screen prompts. After conrming
that you want to perform an update,
WebUpdater automatically downloads
the update and installs it on your
zūmo.
4. Eject and unplug your zūmo (see
page 31).