Filter
Top Products
Reference At a glanceControlsDriving tipsMobility
37
To gain access to this anchor fitting, lift the
plastic plug with the help of a screwdriver, see
arrow.
Use the tether strap anchor fittings only
to fasten child-restraint systems in place;
otherwise the anchor fittings could be dam-
aged.<
Positioning the tether strap
1. Unhook the roller-blind cover, if necessary,
and let it retract.
2. Push the head restraint upward.
3. Guide the tether strap through the head
restraint support posts.
4. Push the head restraint into its lowest posi-
tion.
5. Clip the tether strap onto the anchor fitting.
M Sports seat*: positioning the tether
strap
1. Unhook the roller-blind cover, if necessary,
and let it retract.
2. Guide the tether strap through the holder at
the top of the head restraint.
3. Clip the tether strap onto the anchor fitting.
LATCH child-restraint fixing system*
LATCH: Lower Anchor and Tethers for CHil-
dren.
When installing a LATCH child seat, com-
ply with the child seat manufacturer's
operating and safety instructions.<
Anchor points
The anchor points for the LATCH child seat can
be found at the locations marked by the arrows.
Carefully push the child seat brackets through
the gap between the seat cushion and backrest
cushion at the designated locations, see
arrows.
Online Edition for Part-No. 01 41 0 012 083 - © 04/06 BMW AG