Filter
Top Products
160n
Towing the vehicle
The towed vehicle should always
be the lighter of the two vehicles.
If this is not the case, it is no longer
possible to control vehicle response.<
Tow-starting
It is better to start the vehicle's engine
by jump starting. For instructions on
jump starting, refer to page 158.
Never attempt to use your vehicle to
push another car. This could cause
damage to the energy-absorbing
bumpers.
Towing a vehicle
1 Place the shift lever into "Neutral".
2 Leave the ignition key at position 1 to
ensure that the brake lamps, turn sig-
nals, horn and windshield wipers re-
main operative, and to prevent the
steering lock detent from engaging.
3 Switch on the hazard-warning system
(comply with applicable regulations).
Find some means of identifying the ve-
hicle in tow, for instance, place a sign
or warning triangle in the rear window.
Make sure that the ignition key
remains in position 1 even when
the electrical system has failed. This will
prevent the steering lock from engag-
ing. The steering and brakes are with-
out power assist when the engine is not
running. This means that increased
effort is required for steering and brak-
ing.<
Towing with a commercial tow
truck
> Do not tow with sling-type equipment.
> Use a wheel lift or flat bed carrier.
> Please comply with applicable towing
laws.
Never allow passengers to ride in
a towed vehicle for any reason.<
380us124
Online Edition Part-No. 01 41 0 155 062 - © 07/99 BMW AG