Filter
Top Products
.
.
1）Put the storage battery into the battery compartment. Plug the interface to the jack,
connect the red terminal and the black terminal respectively, to the anode and
cathode of battery. (Notice: make sure they are correctly connected, red to red,
black to black, otherwise, it will cause short-circuit.)
2）Install the battery locker(22) to the designated position, and fix it with 2 screws(18)
3）Install the battery cover(12) to the designated position, and fix it with 2 screws(18)
4）Replace or take out the storage battery and power.
4.1）Loosen the 2 screws(18) on battery cover(12)
4.2）Unplug the interface and jack, loosen the 2 screws(18) on battery locker(22), then
the storage battery can be taken out.