Filter
Top Products
Opening and closing
44
Following interruptions in electrical
power supply
After a power loss, the sunroof may only
respond to the raise command. Then have the
system initialized. BMW recommends having
this work done by your BMW center.
Moving manually*
In the event of an electrical malfunction, you can
move the sunroof manually.
1. Fold back the cover, using the screwdriver
from the toolkit at the points indicated if
necessary, refer to page 243.
2. Remove the Allen wrench
*
from the holder
next to the toolkit and insert it into the open-
ing provided. Move the sunroof in the
desired direction. The arrow below indi-
cates the rotation direction for closing.
Online Edition for Part no. 01 41 2 600 310 - © 02/08 BMW AG