Filter
Top Products
Controls
51
Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility
To unlock the safety belt
1. Open the belt buckle
2. Remove the child-restraint system.
3. Allow the safety belt strap to retract all the
way.
Child-restraint system with tether
strap
There are two additional anchors for child-
restraint systems with tether straps, see
arrows.
Placement of the tether strap
1 Forward driving direction
2 Head restraint
3 Attaching clip
4 Child restraint anchor fitting
5 Rear window shelf
6 Seat back
7 Tether strap
Fold the anchors upward before using them.
1. Push the head restraint upward.
2. Guide the tether strap between the head
restraint holders.
3. Use the hook to clip the tether strap to the
anchor.
4. Push the head restraint into its lowermost
position.
5. Pull the tether strap taut.
LATCH child-restraint fixing
system
LATCH: Lower Anchors and Tethers for CHil-
dren.
When installing and using LATCH child-
restraint systems, comply with the sys-
tem manufacturer's operating and safety
instructions.<
Before installing the child seat, pull the belt out
of the area for the child-restraint fixing system.
Rear seats
The anchor points for the lower LATCH
anchors are located behind the labeled protec-
tive caps.
Make sure that the two lower LATCH
anchors are properly engaged and that
the child-restraint system rests firmly against
the seat backrest.<
ba8_E9293_US.book Seite 51 Freitag, 5. Mai 2006 1:02 13
Online Edition for Part no. 01 41 0 012 346 - © 05/06 BMW AG