Filter
Top Products
Set and Forget Memory
Any time VECTOR 985 is turned off or unplugged
from the cigarette lighter socket, all feature settings
you have selected are retained in the unit’s memory.
Set and Forget Memory eliminates the need to reset
your preferred feature settings each time your unit is
turned off and then back on.
Reset to Factory Settings
You can reset your unit to factory settings for Start-Up
mode, volume, DRK, AUD, CTY and General Selectable
Features. To reset, press and hold the CTY button until
the display shows
“
RREESSEETT
“.Two “beeps“ will sound and
your unit will cycle through the
NNOORRMMAALL
Start-Up
Mode.
DRK (Bright/Dim/Dark) Button
The DRK button allows selection of a bright, fully
adjustable dim or dark mode. VECTOR 985 is
factory preset to full bright display. To engage dim
mode, press and hold the DRK button. The display
will cycle through various levels of dim illumination.
Release the button at your chosen level. To engage
dark mode, press the DRK button a second time. A
single “beep” coupled with the brief illumination of
“
DDAARRKK
”
on the display confirms your selection.
You’ll notice an
“
AAss
”
(AutoScan
™
),
“
HH
”
(Highway
mode),
“
CCxx
”
(City mode) or
“
CCAA
”
(City ALL) remains
dim to confirm your unit is receiving power. To
return to a full bright setting, press the DRK button
a third time; two “beeps” confirm this selection. Use of
the DRK button does not affect audio alerts.
Important—if you press the the DRK button and do not
receive audible confirmation, the audio level has been set
too low.
8
k
k
k