Filter
Top Products
10 11
Programming
There are 7 user-selectable options so you
can customize your STi-R for your own
preferences. The buttons labeled
VOL/MUTE and SENS are also used to
enter the Programming Mode, REVIEW
your current program settings, and to
CHANGE any settings as desired. Pages 12-
14 explain each option in more detail.
How to use Programming
1 To enter Program Mode, press and
hold both the VOL/MUTE and SENS
buttons down for 2 seconds. (The unit
will beep twice, and will display the word
Program).
2 Then press the VOL/MUTE button
to review the current settings. (You can
either tap the button to change from item
to item, or hold the button to scroll
through the items).
3 Press the SENS button to change
any setting. (You can either tap the
button to change from setting to setting,
or hold the button to scroll through all the
options).
4 To leave the Program Mode,
simply wait 8 seconds without
pressing any button, or press the PWR
button. (The unit will display Complete,
beep 4 times, and return to normal
operation).
An example
Here is how you would turn STi-R’s
AutoMute feature off.
1 Enter the Program Mode by holding
both the VOL/MUTE and SENS buttons
down for 2 seconds. The STi-R will beep
twice and display Program.
2 Then hold the VOL/MUTE button
down. The STi-R will scroll through the
categories,
starting with Pilot (Pilot),
Voice
(Voice), Power-on sequence
(PwrOn), signal strength meter (Meter),
AutoMute (
aMute), Brightness (Brt),
and Bands (
Bands).
3 Release the VOL/MUTE button when
the STi-R shows the AutoMute item. Since
the factory setting is for AutoMute to be
on, STi-R will display aMute ON.
(If you accidentally don't release the
RVW button in time, and STi-R goes to
the next category, simply hold the RVW
button down again, the STi-R will scroll
through all of the categories.)
4 Press the SENS button to change from
aMute ON to aMute OFF.
5 To complete the Programming, simply
wait 8 seconds without pressing any
button, or press the PWR button. The STi-R
will display
Complete, beep 4 times, and
return to normal operation.
Overview of Programming
Press the VOL/MUTE button Press the SENS button
to go from one category to change your setting
to the next within a category
PILOT Pilot HWY * Full word: Highway, AutoScan, etc.
(Power-on indication) Pilot H Letter: H, A, C, or Cnx
Pilot V Vehicle voltage
VOICE Voice ON * Voice alerts on
Voice OFF Voice alerts off
POWER-ON SEQUENCE PwrOn STD * Standard power-on sequence
PwrOn FST Fast power-on sequence
SIGNAL STRENGTH METER Meter STD * Standard signal strength meter
Meter THT Threat Display
Meter TEC Tech Display
AUTOMUTE aMute ON * AutoMute on
aMute OFF AutoMute off
BRIGHTNESS Brt Auto * Automatic brightness
Brt Min Minimum brightness
Brt Med Medium brightness
Brt Max Maximum brightness
Brt Dark All dark
BANDS Bands DFT * Factory default settings
Bands MOD Factory default settings modified
Turn bands “ON” or “OFF” by pressing
and holding the “SENS” button
X ON
or OFF (default is on)
K ON or OFF (default is on)
KaSW ON or OFF (default is on)
LSR ON or OFF (default is on)
SWS ON or OFF (default is off)
POP ON or OFF (default is off)
RDR ON or OFF (default is on)
When KaSW is off,
each Ka segment can be turned on or off
Ka1 (33.392 - 33.704) ON or OFF
Ka2 (33.704 - 33.896) ON or OFF
Ka3 (33.886 - 34.198) ON or OFF
Ka4 (34.184 - 34.592) ON or OFF
Ka5 (34.592 - 34.808) ON or OFF
Ka6 (34.806 - 35.166) ON or OFF
Ka7 (34.143 - 35.383) ON or OFF
Ka8 (35.378 - 35.618) ON or OFF
Ka9 (35.595 - 35.835) ON or OFF
Ka10 (35.830 - 35.998) ON or OFF
* Factory Default Settings
To reset STi-R to its original factory settings, press and hold the
“VOL/MUTE” and “SENS” buttons while turning the power on.
The STi-R’s display will provide a
Reset message,
accompanied by an audible alert, acknowledging the reset.