Filter
Top Products
Table of Contents
Quick Reference Guide 4-5
Installation 6-7
• Power Connection 6
• Mounting Location 6
• Windshield Mount 7
Controls and Features 8-11
• Power and Volume Control 8
• Power-on indication 8
• Voice 8
• AutoMute 8
• Mute 8
• Highway / AutoScan / City Button 9
• Brightness and Dark Mode 9
• Audible Alerts 10
• Power Connector 10
• Signal Strength Meter 11
• Tech Display 11
Programming 12-16
• How to use Programming 12
• Example of Programming 12
• Overview of Programming 13
• Details of Programming 14-16
Technical Details 16-23
• Changing the Faceplate 16
• Specifications 17
• Interpreting Alerts 18-19
• How Radar Works 20
• How “POP” Works 20
• How Laser Works 21
• How Safety Radar Works 22-23
Service 24-28
• Troubleshooting 24-25
• Service 26
• Registration 28
• Warranty and Accessories 29
32
Quick Reference Card
BEL V995 Quick Reference Card
* Factory Default Settings
̄ Remove card along perforations ̄
̄ Remove card along perforations ̄
Press the RVW button
to go from one category
to the next
PILOT
(Power-on indication)
VOICE
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
AUTOMUTE
CITY MODE SENSITIVITY
BANDS
Pilot HWY
Pilot H
Pilot V
Voice ON
Voice OFF
PwrOn STD
PwrOn FST
Meter STD
Meter TEC
aMute ON
aMute OFF
City STD
City LoX
City NoX
Bands ALL
Bands MOD
X ON or OFF (default is on)
K ON or OFF (default is on)
Ka ON or OFF (default is on)
POP ON or OFF (default is off)
Ku ON or OFF (default is off)
LSR ON or OFF (default is on)
SWS ON or OFF (default is off)
Press the CHG button
to change your setting
within a category
*Full word: Highway or AutoScan or City
Letter: H or A or C
Vehicle voltage
*Voice alerts on
Voice alerts off
*Standard power-on sequence
Fast power-on sequence
*Standard signal strength meter
Tech Display
*AutoMute on
AutoMute off
*Standard City mode sensitivity
Low X band sensitivity in City Mode
No X band sensitivity in City Mode
*All bands enabled
One or more bands are disabled
Turn bands “ON” or “OFF” by
pressing the VOLUME/MUTE button