Filter
Top Products
1. Display. (1)
Can be fitted virtually invisibly in any car.
2. Power/Volume button. (P/V)
Press briefly to switch your Vector
Europa 966R on or off. The self-test will
take place automatically and the standard
setting will be 34 gigahertz. See 'led 34'.
By holding P/V (2) pressed in you can
adjust the volume with leds (12).
3. 34 GHz. (3)
Lights up green when the Vector
Europa 966R is active. When detection
occurs the 34 GHz led will flash.
Initially the 34 GHz frequency is the
standardsetting. This setting will detect
commonly used speed-checking equipment
on motorways.
4. 24 GHz switch. (4)
This switch activates the 24 GHz
frequency. The green led (5) will light up
when this frequency has been activated.
On detection the 24 GHz led (5) will
flash. This frequency is used not only on
motorways but also on secondary roads.
5. 13 GHz switch. (6)
This switch activates the 13 GHz
frequency. The green led (7) will light up
when this frequency has been activated.
When detection occurs the 13 GHz led (7)
will flash.
6. High switch. (HI)
This is used to increase the reception
sensitivity of the 13 GHz frequency.
The HI led (9) will light up to confirm
operation. The Vector Europa 966R only
gives anaudible alarm on detection of 13
GHz signals if the signal strength is greater
than two leds (12). This standard setting
avoids false alarms. You can increase
sensitivity for the 13 GHz frequency using
the HI-switch.
7. External port.
Your supplier will be able to explain all
the expansion possibilities for your Vector
Europa 966R.
4 Operation of the Vector Europa 966R.