Filter
Top Products
Command Sequence:
Commands are executed in the order received. The host should wait for a response from the
player before sending the next command. If the player receives a new command before
executing the previous command, the player may discard the previous command. If the host
does not receive a response from the player 10 seconds after the command is issued, the host
may consider the command lost during transmission, and can retransmit the command.
Command List:
A. Command that maps to a remote control button
These commands map directly to the infrared remote control buttons and are handled in the
same way. No parameters are needed for these commands. For actions that require a multiple-
key sequence, such as go to a certain chapter (GoTo command, numeric key commands, Enter
command), the player responds to each command individually. When the last command is
received the player shall respond with either OK or ER depending on the result of the action.
Command
Code
Remote Key Function Response Example
POW Power Toggle “Standby” and “On” OK ON
OK OFF
SRC Source Go to Home Menu OK
EJT Open Open/close the disc tray OK OPEN
OK CLOSE
PON On Discrete on OK ON
POF Off Discrete off OK OFF
SYS P/N Switch output TV system OK NTSC
OK PAL
OK AUTO
DIM Dimmer Dim front panel display OK ON
OK DIM
OK OFF
PUR Pure Audio Pure audio mode (no video) OK ON
OK OFF
MUT Mute Mute audio OK MUTE
OK UNMUTE
NU1 1 Numeric key 1 OK
NU2 2 Numeric key 2 OK
NU3 3 Numeric key 3 OK
NU4 4 Numeric key 4 OK
NU5 5 Numeric key 5 OK
NU6 6 Numeric key 6 OK
NU7 7 Numeric key 7 OK
NU8 8 Numeric key 8 OK
NU9 9 Numeric key 9 OK
NU0 0 Numeric key 0 OK
CLR Clear Clear numeric input OK
3