Filter
Top Products
n Si lent Arm In di ca tions. The parking lights will flash twice, the
doors will lock, the starter will be disabled and the LED will flash
slowly.
n Si lent Dis arm In di ca tions. The parking lights will flash once,
the doors will unlock, the starter will be enabled and the LED will
turn off.
n
Interior Light Illumination — When the alarm system is remotely
disarmed, the vehicle's interior light(s) will turn on for 30 seconds or
until the ignition key is turned on.
n
To Activate Optional Accessories — Press remote button #2 for
1-2 seconds to activate an optional accessory. To activate an additional
optional accessory, press remote buttons 1 & 2 simultaneously for 1-2
seconds.
n
Valet Switch — The valet switch is a small hidden toggle switch which
can only be controlled with the use of your ignition key. This switch
allows you to program many features of the alarm system. In the event of
a lost or stolen remote control, you can activate the Protected Valet Mode
to bypass (shut off) the alarm functions.
BE SURE TO ASK YOUR DEALER TO SHOW YOU WHERE THE VALET
SWITCH IS LO CATED.
n
Protected Valet Mode — You can place your system in Protected
Valet Mode when your car is being serviced by mechanics, car wash
personnel or driven by valet attendants, and still maintain possession of
your remote control(s). While in Protected Valet Mode, all alarm
functions are bypassed to prevent undesired or accidental arming.
n To Turn on Pro tected Valet Mode
1. Turn your ignition key to the "ON" position or start the vehicle.
2. Flick the valet switch to the "ON" position.
3. The LED will turn on solid red to in di cate the sys tem is in
Pro tected Valet Mode.
4. Turn your ignition key to the "OFF" position.
6