Avital 6501 Remote Starter User Manual


 
Table of Contents
AviStart 6501 ............................... 2
Lifetime Warranty ............................2
Remote Controls ............................2
Stealth Coding Technology.......................3
Electronic Scan Prevention (ESP)..................... 3
Instant Remote Control Code Deletion.................. 3
One-Step Remote Control Code Learning ................ 3
Valet Switch............................... 3
Operating Your AviStart..........................4
To Arm The System ...........................4
Remote-Controlled Silent Arm/Disarm ................. 4
User-Programmable Long-Term Silent Arm/Disarm ........... 4
Two-Stage Unlock Capability ...................... 5
Remote Panic with Safety Locks .................... 5
Interior Light Illumination ........................ 5
User-Programmable Passive Door Lock ................. 5
User-Programmable Ignition-Controlled Door Lock/Unlock ....... 5
User-Programmable RPM Door Lock .................. 6
Protected Valet Mode .......................... 6
Remote-Controlled Valet.........................6
LED System Status Indicator ....................... 7
Remote-Controlled Trunk Release Capability .............. 7
Remote-Controlled Accessory Outputs ................. 7
Zone
2
Impact Sensor ......................... 7
Remote-Controlled Sensor Bypass .................... 8
Previous Intrusion Alert ......................... 8
Specific Zone Intrusion Identification .................. 8
User-Programmable Door Ajar Indication ................ 8
User-Programmable Siren Duration ................... 9
Alarm State Memory .......................... 9
Automatic Malfunction Override .................... 9
Remote Engine Start - Safety and Counter-Theft............. 10
Remote Engine Start - Operation .................... 11
User-Programmable Temperature-Controlled Starting.......... 12
Pit Stop Mode ............................. 13
User-Programmable Features....................... 14
Programming Table for System Features ................ 15
Programming Table for Remote Controls ................ 16