13
©
2008 Directed Electronics
ZONE
(Number of DEALER-INSTALLED
LED Flashes) DESCRIPTION OPTIONS
1
Instant trigger for optional sensor,
hood or trunk pins
2 A heavier impact detected by
the on-board impact sensor
3 Door switch trigger
5 Ignition trigger
NOTE: The LED does not report when the warn-away response has been
activated; it only reports triggered sequences.
Code Hopping
Technology
The receiver and remote use mathematical formulas called algo-
rithms to change their codes each time the remote is used. This
Code Hopping Technology has been developed to increase the
security of the unit. By following this set code sequence, the
receiver and remote stay synchronized, even if the remote is used
out of range of the vehicle. If, however, the remote is pressed many
times out of range, or the battery is removed, the remote may get
temporarily out of sync and fail to operate the system. To resyn-
chronize the remote, simply press several times within range
of the vehicle. The system will automatically resynchronize and the
remote will respond normally.