Filter
Top Products
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
!
IPM525-S
|
Flexible Gooseneck Seat Bolt or Floor Mount for Apple iPhone® and iPod touch®
Step 1. Connect the dual T-slots (C) on the back of the holder to the
dual T-tabs (D) on the mount pedestal head.
A
A
A
A
B
B
Install the Support Legs to the Holder
Step 1.
Insert the holder support legs (A) by sliding them into the
support leg grooves (B) on the top and bottom of the holder.
iPhone Holder Attachment
(C) T-slots
(D) T-tabs
(iPhone device
not included)
F
E
Secure holder with your hand for support, as spring-loaded
mechanism requires signifi cant force to operate. Hold your
phone and insert into universal holder by pushing down on the
bottom spring-loaded support legs with moderate amount of
pressure (E). Slide the top of the device under the top support
legs (F) until it fi ts snuggly in the holder.
Insert Phone into Holder
Step 1.
Adjusting Holder to Fit Phone
Using the Optional 360° Swivel SBH Head for Landscape Viewing
G
G
If necessary, adjust the support legs (G) on top and bottom by
sliding them laterally to avoid any buttons or ports that may be
on your phone.
To rotate your device in landscape view, install the optional
SP-CM088-SBH 360° swivel SBH head. Unscrew the wing
nut on the gooseneck and remove the already installed tilt
swivel head. Insert the SP-CM088-SBH 360° swivel SBH head
and retighten the gooseneck wing nut. Adjust the angle of
the 360° swivel SBH head with the head wing nut and swivel
adjustment ring as necessary.
Step 1.
Step 1.
Wing Nut
Swivel
Adjustment
Ring
Wing Nut
The Mobile Mounting Specialists™
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2010 Arkon Resources, Inc.