Filter
Top Products
P. 10 User Guide
x On models where starter kills were installed, pressing the LOCK button will
also activate the starter kill.
x On alarm models, pressing the LOCK button will also activate the monitoring.
The Stop Confirmation Was Not Received
If after remote stopping the vehicle no confirmation was received i.e. the display did not
return to its basic state simply press the LOCK button, this will refresh the display. If the
engine was stopped, the smoke icon and the hourglass icon will disappear and the time will be
displayed.
Pressing the LOCK button will also lock all doors (the lock icon will appear). If the doors were
already locked prior to pressing the LOCK button, there will be no change in the status of the
doors i.e. the doors will remain locked.
x On models where starter kills were installed, pressing the LOCK button will
also activate the starter kill.
x On alarm models, pressing the LOCK button will also activate the monitoring.
Multi-Level Features (default state)
Basic Features (press the FUNCTION button 1X)
FUNCTION ¾ LOCK: ......................................... aux 2
FUNCTION ¾ START/STOP .................................. cold weather
Multi-Car Operation (press the FUNCTION button 2X)
FUNCTION ¾ FUNCTION ¾ LOCK:.................. 2
nd
car lock
FUNCTION ¾ FUNCTION ¾ UNLOCK:............... 2
nd
car unlock
FUNCTION ¾ FUNCTION ¾ START/STOP: .......... 2
nd
car start/stop
FUNCTION ¾ FUNCTION ¾ TRUNK: ................ 2
nd
car trunk
Customized Features (press the FUNCTION button 3X)
(May not be compatible with some vehicles)
Your installer can add customized features such as turning on the radio, opening sliding doors, etc.
FUNCTION ¾ FUNCTION ¾ FUNCTION ¾ LOCK:............ customized feature 1
FUNCTION ¾ FUNCTION ¾ FUNCTION ¾ UNLOCK:.........customized feature 2
FUNCTION ¾ FUNCTION ¾ FUNCTION ¾ START/STOP:..... customized feature 3
FUNCTION ¾ FUNCTION ¾ FUNCTION ¾ TRUNK:........... customized feature 2
By default, the multi-level features are programmed as follows:
x Level 1 (Basic Features)
x Level 2 (Multi car operation)
x Level 3 (Customized Features)
Accessing the Multi-Level Features and Other Transmitter Functions
x To access a Level 1 feature, press and hold the FUNCTION button until you hear a “beep”; within
three seconds of hearing the “beep”, release the FUNCTION button. will be displayed. This
display means that you are now in Level 1. Simply press the corresponding button to access
the desired feature.
x To access a Level 2 feature, press and hold the
FUNCTION button until you hear a “beep within
three seconds of hearing the “beep”, release the
FUNCTION button and press and release the
FUNCTION button once more. will be displayed. This display means that you are now in
Level 2. Simply press the corresponding button to access the desired feature.
x To access a Level 3 feature, press and hold the FUNCTION button until you hear a “beep”; within
three seconds of hearing the “beep”, release the
FUNCTION button and press and release the
FUNCTION button two more times. will be displayed. This display means that you are now
in Level 3. Simply press the corresponding button to access the desired feature.
x To access the transmitter functions (clock and alarm adjustments), press and hold the
FUNCTION
button until you hear a “beep”; within three seconds of hearing the “beep”, release the FUNCTION
button and press and release the FUNCTION button three more times. There will be two quick
“beeps” indicating that you are now in the transmitter functions adjustment menu. The Hour
position will be flashing. Simply press and release the FUNCTION button until you reach the
desired location and proceed with the adjustment by pressing the START/STOP or TRUNK buttons.