Filter
Top Products
SETTING THE UNIT INTO READY MODE
This UNIT is designed for MANUAL transmission only, therefore must be set
into READY-MODE in order to remote start the vehicle.
If the system is not in READY-MODE the vehicle CANNOT be started by
remote.
To set the system into READY-MODE you must do the following:
1. Ensure all the doors are closed
2. Make sure shifter is in neutral
3. Start vehicle with the key
4. Apply the Parking brake
5. Within 20sec. push any button on transmitter.
(Parking lights will flash 3 times quickly, and stay on)
6. Remove the key and vehicle will stay running.
7. Exit the vehicle and close the door.
8. Press and hold the LOCK button, the doors should lock and the vehicle
shuts off. Press and hold the STOP button, the vehicle should shut off and
the door should stay unlocked.
NOTE: If no button is pressed, the system will run for 15 minutes, shut off
and stay in READY-MODE without locking the doors.
REMAINING IN READY MODE
Once the vehicle is in Ready Mode you can start and stop the vehicle at will.
However, should any of the following occur, the vehicle will exit Ready Mode
thus eliminating the remote start option until Ready Mode is restored.
1. Doors opened.
2. Hood opened.
3. Brakes pressed.
4. Parking brake disengaged.
5. Key turned to the on position.
Should any of the above occur, ready mode will be cancelled.
*NOTE: The unit will notify the user that it has exited Ready Mode by
giving three slow flashes of the vehicles parking lights.
USER SELECTABLE OPTIONS
The AS-1565 was designed with flexibility and OEM integration in mind. With
the integration of the following options, this unit can single-handedly control
nearly any electrical system in your vehicle.
The user selectable options are as follows:
NOTE: The programming of your system should be left to a professional.
Changing any of the settings may effect the operation of your AS-1565.
REMOTE DOOR LOCKS OPTION
If your AS-1565 was installed with the Remote Door Locks option, you will have
the convenience of remote keyless entry.
To UNLOCK your doors, press and hold the UNLOCK button for approx. 1 sec.
The parking lights will flash twice to confirm that the doors have been unlocked.
(If your system was installed with the Starter Disable option, this will also disarm
the system).
To LOCK your doors, press and hold the LOCK button for approx. 1 sec. The
parking lights will flash once to confirm that the doors have been locked. (If your
system was installed with the Starter Disable option, this will also arm the
system).
IGNITION CONTROLLED DOOR LOCKS OPTION
This is an added security feature. If your system was installed with the Ignition
Controlled Door Locks option, the doors will automatically be locked as soon as
the key is turned to the ignition ON position, and you press the brakes. When the
key us turned to the ignition OFF position, the doors will automatically be
unlocked.
SECURE LOCK OPTION
This is an added security feature. If your Autostart was installed with the Secure
Lock option, it will automatically lock your doors 4 seconds after your start your
car by remote.
3
6