Filter
Top Products
JAN/07/2003
RS850 OP 15
Press the transmitter (4) and (4) button at the same time to active
Channel 4 function. Channel 4 is user-programmable timer output. You may
program the built-in timer to send a ground signal for any time duration from 1
second to 120 seconds. For instance, this timer output may be used to turn on
the headlight, power window or sunroof. (Factory defaults setting at momentary
output.)
W. CHANNEL 5 TIMER CONTROL OUTPUT
(See Alarm Feature III – 6 Programming.)
Press the transmitter (5) and (5) buttons at the same time to
active Channel 5 function. Channel 5 is user-programmable timer output.
You may program the built-in timer to send a ground signal for any time
duration from 1 second to 120 seconds. For instance, this timer output may
be used to turn on the headlight, power window or sunroof. (Factory
defaults setting at momentary output.)
X. CHANNEL 6 TIMER CONTROL OUTPUT
(See Alarm Feature III – 7 Programming.)
Press the transmitter (6) and (6) buttons at the same time to
active Channel 6 function. Channel 6 is user-programmable timer output.
You may program the built-in timer to send a ground signal for any time
duration from 1 second to 120 seconds. For instance, this timer output may
be used to turn on the headlight, power window or sunroof. (Factory
defaults setting at momentary output.)
Y. POWER ON MEMORY:
This security system is equipped with circuitry that will allow the unit to
remember its alarm state if the power is lost and then reconnected.
REMOTE START OPERATION:
A. TO REMOTE START THE VEHICLE: