Filter
Top Products
2
TRANSMITTER OPERATION
Transmitter Button System Function Remark
Button
Arm / Lock door
– Button
Arm and Delete
Optional Sensor
Press twice.
Button
Car Locator System in Armed.
Button for 3 seconds
Panic function Press 3 seconds
Button
Disarm & Unlock
Door
– Button
Two Steps Door
Unlock & Disarm
System
Press twice within 3
seconds.
Button for 2 seconds
Pop Trunk Release Press 2 seconds
+ Button
Silent Arm / Disarm Ignition in "off"
position.
+ Button for 1 seconds
Activate Car-Jacking
Ignition in "on"
position.
II
Switching code For
2nd Car Operation.
ACTIVE ARMING – LOCK & ARM:
1. Press
button on transmitter.
2. The siren will chirp once and the parking lights will flash once indicating
that the system is now armed. The vehicle doors will lock upon arming
when interfaced with the security system.
Note: Defective sensor reminder: If the siren sounds 3 chirps, then you
have left a door, trunk, or hood lid ajar.
SILENT ARMING / DISARMING: Press the
+
button together on the
transmitter to arm or disarm your security system, No chirp sound will be
heard; arm / disarm confirmation will be through the vehicles parking lights
only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Press the
button
on the transmitter twice within 3 seconds will arm the security system, by-
pass the shock sensor. The system will chirp one additional time to confirm
the sensor bypass mode was activated. The sensor bypass feature is
programmed to activate for one arming cycle only. The security system will
return to normal operation during the next arming cycle
PASSIVE ARMING:
Active arming / disarming is controlling your security system via the remote
transmitter. This security system is equipped with an optional Passive
Arming feature, which allows the security system to arm 30 seconds after
the last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast
for 30 seconds. If you reopen any door / hood / trunk, the security
system LED will stop flashing. It will begin flashing again once all
vehicle entrances are closed.