Auto Page CPX-2350 Automobile Alarm User Manual


 
TRANSMITTER OPERATION
Transmitter Button
System Function
Remark
Button
Arm / Lock door
Button
Arm and Delete
Optional Sensor
Press twice.
Button
Car Locator
System in Armed.
Button for 3 seconds
Panic function
Press 3 seconds
Button
Disarm & Unlock
Door
Button for 2 seconds
Pop Trunk Release
Press 2 seconds
-
Passive Arming By
-
pass
While passively
arming
+ Button
Silent Arm / Disarm
Ignition in "off"
position.
+ Button for 1 seconds
Activate Car
-
Jacking
Ignition in "on"
position. If
programmed
ACTIVE ARMING LOCK & ARM:
1. Press
button on transmitter.
2. The siren will chirp once and the parking lights will flash once indicating
that the system is now armed. The vehicle doors will lock upon arming
when interfaced with the security system.
Note: Defective sensor reminder: If the siren sounds 3 chirps, then you
have left a door, trunk, or hood lid ajar.
SILENT ARMING / DISARMING: Press the
+
button together on the
transmitter to arm or disarm your security system, No chirp sound will be
heard; arm / disarm confirmation will be through the vehicles parking lights
only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Press the
button on
the transmitter twice within 3 seconds will arm the security system, by-pass
the shock sensor or the optional sensor connected to 4 pin plug. The system
will chirp one additional time to confirm the sensor bypass mode was
activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during
the next arming cycle