Filter
Top Products
5
your absence. Before turning the key on, examine the LED
and refer to the INTRUSION WARNING SIGNALS section of
this manual to identify which zone was triggered.
If the siren did not sound when disarming, then the chirps
have been turned off, and you should refer to the section titled
“ELIMINATING THE ARM / DISARM CHIRPS” in this manual.
þ Doors Unlock.
Using the optional Access Guard feature, the alarm can be
wired to unlock only the drivers door during this step. To unlock
all the doors, press and release the Unlock button of the
transmiter a second time within 3 seconds.
(Power Door Locks Required.)
o OPTIONAL Courtesy lights turn on for 30 seconds, or until the
ignition key is switched on.
SILENT DISARMING
1. As you approach the vehicle, press and hold the Unlock button on the keychain
transmitter for 2 seconds.
þ Red dash mounted LED turns off.
If passive arming was selected during the installation, then the
LED will start flashing rapidly, indicating that the system is re
arming automatically. Open any door to suspend the automatic
arming.
þ Parking Lights flash two times.
If the parking lights flashed three times, then the alarm was
triggered in your absence. Before turning the key on, examine
the LED to identify which zone was triggered.
þ Siren will not sound.
If the siren sounds 4 chirps, then the alarm was triggered in
your absence. Before turning the key on, examine the LED
and refer to the “INTRUSION WARNING SIGNALS” section of
this manual to identify which zone was triggered.
þ Doors Unlock.
Using the optional Access Guard feature, the alarm can be
wired to unlock only the drivers door during this step. To unlock
all the doors, press and release the Arm/Disarm button of the
transmiter a second time within 3 seconds. (Power Door Locks
Required.)
o Courtesy lights turn on for 30 seconds, or until the ignition key is
switched on.