Filter
Top Products
128-6103
Back Page
During the program routine, if a transmitter button is programmed into receiver channel 2, then the unit will always have separate lock/unlock
from that transmitter.
If during the program sequence receiver channel 1 is programmed and receiver channel 2 is skipped over, as indicated in the transmitted
program guide, then the unit will operate as a single button lock/unlock unit from that transmitter.
It is possible to have one transmitter programmed for single button lock/unlock and one transmitter programmed for separate button lock/
unlock if the customer so desires.
If you inadvertently incorrectly program the transmitter, please read the information on reprioritizing found in the transmitter programming
guide.