Audiovox PRO-9800 Automobile Alarm User Manual


 
128-6527
15 of 20
Page 15
TRANSCEIVER ICONS AND THEIR INDICATIONS
When Disarmed, Press the Arm/Lock button to Lock
and Arm the System. The Lock Icon is displayed on
the LCD panel & the parking lights flash once.
When Armed, Press the Disarm/Unlock button to
Unlock and Disarm the System. The Unlock Icon is
displayed on the LCD panel & the parking lights flash
twice.
When the Key Icon Button Has Been Operated for 3
seconds the trunk open icon will flash on the LED
Screen.
When the Key Icon Button is pressed 2 times in suc-
cession The three puffs of smoke show on the LCD
screen. While the vehicle is running, the exhaust indi-
cation will flash and the hour glass will indicate count
down timer based on the 5, 10, 15, or 20 minute run
time set up by your installation center. When the unit
shuts off the exhaust indication will turn off and the
transmitter will play a melody.
When Panic Mode has been activated and the system
is armed the vehicle's lights, the lock and the siren
icon will flash on the LCD screen. If the system is
disarmed and the Panic Mode is activated, the lights,
siren, and the unlock icons will flash on the LCD screen.
When ever the vehicle is operated from the two way
transmitter, the unit will beep responsive to the
function executed at the vehicle. 1 beep when armed,
2 beeps when disarmed, etc... at times It may be in-
convenient or too noisy to hear the beep tones, so the
system allows you to set the unit for vibrate mode. To
toggle on or off beep tones/vibrate, press the
F & Unlock buttons, the unit will beep or vibrate, and the
icons shown left will appear on the screen.
If the alarm system has been triggered, the icon dis-
played on the transmitter LCD will indicate the which
zone has been activated, as well sound the beep tones,
or vibrate dependent upon the setting as shown above.