Filter
Top Products
Optional My Car Sound Feature
The optional my car sound feature (Audiovox acc.. Speaker and labor required) allows you to program
songs and tones to your system (i.e. Setting a different tone for Lock activation and unlock activation).
Turning My Car Sound On: Press and release the TRUNK icon button on the remote control, then press
and hold the LOCK icon button on the remote control within 2 seconds. The speaker will give notification
that My Car Sound has be turned ON.
Turning My Car Sound Off: Press and release the TRUNK icon button on the remote control, then
press and hold the UNLOCK icon button on the remote control within 2 seconds. The speaker will give
notification that My Car Sound has be turned OFF.
Setting My Car Sound Tones: Activate the function you wish to program a My Car Sound tone to. Within
3 seconds, press and release the TRUNK icon button on the remote control, then press the OPTION
button on the remote control within 2 seconds. Press the LOCK icon button on the remote control or
UNLOCK icon button on the remote control to scroll through the different tones.
While in this mode the TRUNK icon button on the remote control will change the length or version of
the tone (if applicable).
Press the OPTION button on the remote control to select the desired tone and exit programming.
Please see your sales associate for details on My Car Sound or any other Audiovox accessory.
Replacing Remote Control Batteries
2-way LCD Remote Control:
The AAA alkaline battery inside the 2-way LCD remote control should last approximately 1 year under
normal use. When the batteries become weak you will notice the remote control range (the distance
from the vehicle the remote control will work) deteriorate and the BATTERY icon on the LCD remote
control will show.
1. Slide the small release tab on the back of the remote control to the unlock position.
2. Gently slide the battery cover off of the remote control.
3. Remove the old AAA battery, observing the +/- symbols on the battery,
and replace with a new AAA battery.
4. Gently slide the battery cover on to the back of the remote control and lock the release tab in
place.
5. Test operation of the remote control.
1-Way Five Button Remote Control:
The two (2) 3 volt lithium batteries (model CR2025) inside each remote control should last
approximately 1 year under normal use. When the batteries become weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate and the small LED
on the remote control will dim. To replace the remote control batteries:
1. Using a small (#1) phillips screwdriver, remove the screw on the back of the remote control.
2. Gently unsnap the halves of the remote control apart.
3. Slide the 2 lithium batteries out of the circuit board, observing the +/- symbols on the batteries
and replace with new lithium 3 volt batteries (model CR2025).
4. Gently snap the halves of the remote control back together and reinstall the phillips screw on
the back of the remote control.
5. Test operation of the remote control.
11