Filter
Top Products
Page 3
NOTE: The engine will stop running before the pre-programmed run cycle
has expired if you perform any one of the following functions;
-Press and release button 2 on the keychain transmitter two times
within 2 seconds.
-Depress the brake pedal.
-Open the vehicle's hood
-Move the safety control switch to the Off position.
SAFETY CONTROL SWITCH
The control switch allows you to temporarily disable the remote starting function
of the system and moving this switch to the Off position is recommended when-
ever the vehicle is being serviced. When the system is disabled, the remote
door locks and optional accessories will remain operational.
ADDITIONAL REMOTE FUNCTION (CHANNEL 2)
This system has an additional feature that can be connected to a number of
different optional accessories. Some of the more common uses for this chan-
nel are;
Remote Trunk Release
Remote Window Closure
Remote Garage Door Interface
To activate the optional accessory, press and hold button 2 on the keychain
transmitter for 4 seconds.
NOTE:The feature that has been added to channel 2 will always be activated
using the same transmitter button that remotely starts the vehicle. There
is no way to move the channel 2 function to a different transmitter button.
ADDITIONAL REMOTE FUNCTION (CHANNEL 3)
This system has an additional feature that can be connected to a number of
different optional accessories. Some of the more common uses for this channel
are;
Remote Trunk Release
Remote Window Closure
Remote Garage Door Interface
To activate the optional accessory, press button 3 on the keychain transmitter.
The optional accessory will immediately engage.
FUNCTION SETTING CHART
To be completed by installer
Door Lock Time
Lights
Run Time
3.5
Pulse
10 Min.
1 Sec.
Steady
15 Min.