128-7407
3 of 12
To exit program mode, turn ignition off, or press and release valet switch.
RF Programmable Features Bank 3 Is Remote Start Selectable Features:
Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps 5 Chirps 6 Chirps
1st Defrost Output Pulsed 10 Mins
2nd RF Start Chirp NA
3rd Run Time NA
4th Parking Lights NA
5th Input Check NA
6th Voltage Level NA
7th Ing. 2 Select NA
8th Ign. 3 Select NA
9th Diagnostics NA
10th Crank Time NA
11th Gas/Diesel NA
12th Transponder O/P NA
13th Temp Start NA
14th Crank Averaging NA
15th R/S Shock NA
16th Turbo Select NA
17th Black/Blue (Aux O/P) NA
When using the RF programmer, enter the program mode as follows:
Turn the ignition on
Press and release valet switch 3 times
turn ignition off then on
Press and hold valet switch for 5 seconds
Siren chirps 2 times indicating RF feature program mode.
To exit program mode, turn ignition off, or press and release valet switch
Page 3