Filter
Top Products
Setting monitor
4
Settings in Setup menu
In addition, the monitor offers you the possibility of performing the following set-
tings in the Setup menu:
• Bright.Contr.: Auto/Auto off:
Automatic brightness control On/Off. With “Auto” the display brightness is auto-
matically adapted to the ambient lighting.
• Mount.Pos.: high/low:
Adaptation of the display brightness to the mounting position high/low
• Loudspeaker: On/Off:
Built-in loudspeaker On/Off.
ஊ
If the loudspeaker is switched off, then it will automatically be switched on again
as soon as you adjust the monitor volume.
Invoking/quitting Setup menu
— Press all three buttons at the top of the monitor at the same time.
The Setup menu appears.
— Briefly press the MENU button until the desired setting is activated.
— Set the volume as required.
— To quit the Setup menu press the MENU button until the menu is hidden.
ஊ
If a button has not been pressed for several seconds, then the OSD menu is auto-
matically hidden again.
Automatic brightness control
If the automatic brightness control (“Bright.Contr.”) in the Setup menu is set to
“Auto”, then the brightness of the display is automatically adjusted to the ambient
light conditions.
With the “Brightness” option in the OSD menu you can adjust the maximum and
minimum brightness of the display. Note that for daylight the maximum brightness
(“Brightness Day”) and for darkness the minimum brightness (“Brightness Night”)
should be set.
The brightness is then adjusted between these two limits according to the ambient
lighting.
If the automatic brightness control is switched off, then the display shows “Bright-
ness Auto OFF” in the OSD menu.
US_02_operations.fm Seite 4 Montag, 19. März 2001 10:57 10