Filter
Top Products
128-4246A
Page 4
5 of 20
Turn the ignition key on, and move the valet switch to the “on” position. The alarm will stop
sounding, and the vehicle can now be started.
NOTE: Always remember to move the Valet Switch back to the ”off” position. This will
ensure that the vehicle remains protected at all times.
REMOTE PANIC OPERATION (CHANNEL 1) :
The arming button on your key chain transmitter also functions as a “panic” switch for instant
activation of the alarm in emergency situations. To use the remote panic switch;
1. Press and hold the button on the key chain transmitter for 3 seconds or more. The alarm
will immediately sound.
2. To stop the alarm, press and release the button on the key chain transmitter. If the button
is not pressed, the alarm will automatically stop after 60 seconds.
WARNING: Excessive pressure on the transmitter buttons will damage the
internal components on the circuit board. All that is required is a light push to
the button.