Attwood 8314 Automobile Parts User Manual


  Open as PDF
of 2
 
TOOLS REQUIRED:
1.Suitable wrench to fit nut supplied with steering shaft.
MOUNTING INSTRUCTIONS:
1.Slide steering wheel onto steering shaft, aligning key with keyway.
2.Install locknut (supplied with steering shaft).
3.Tighten nut securely with suitable wrench.
4.Align clips on cap over slots on wheel and push cap on.
CAP
STEERING SHAFT
ATTWOOD
STEERING WHEEL
LOCKNUT
CAUTION: ALWAYS CHECK TO SEE THAT THE STEERING
WHEEL IS SECURELY MOUNTED AND IS IN GOOD WORKING
ORDER BEFORE EACH
OPERATION OF THE CRAFT. IF ANY
LOOSENESS IS DETECTED, DO NOT OPERATE THE CRAFT
UNTIL CORRECTED.
TOOLS REQUIRED:
1.Suitable wrench to fit nut supplied with steering shaft.
MOUNTING INSTRUCTIONS:
1.Slide steering wheel onto steering shaft, aligning key with keyway.
2.Install locknut (supplied with steering shaft).
3.Tighten nut securely with suitable wrench.
4.Align clips on cap over slots on wheel and push cap on.
CAP
STEERING SHAFT
ATTWOOD
STEERING WHEEL
LOCKNUT
CAUTION: ALWAYS CHECK TO SEE THAT THE STEERING
WHEEL IS SECURELY MOUNTED AND IS IN GOOD WORKING
ORDER BEFORE EACH
OPERATION OF THE CRAFT. IF ANY
LOOSENESS IS DETECTED, DO NOT OPERATE THE CRAFT
UNTIL CORRECTED.
TOOLS REQUIRED:
1.Suitable wrench to fit nut supplied with steering shaft.
MOUNTING INSTRUCTIONS:
1.Slide steering wheel onto steering shaft, aligning key with keyway.
2.Install locknut (supplied with steering shaft).
3.Tighten nut securely with suitable wrench.
4.Align clips on cap over slots on wheel and push cap on.
CAP
STEERING SHAFT
ATTWOOD
STEERING WHEEL
LOCKNUT
CAUTION: ALWAYS CHECK TO SEE THAT THE STEERING
WHEEL IS SECURELY MOUNTED AND IS IN GOOD WORKING
ORDER BEFORE EACH
OPERATION OF THE CRAFT. IF ANY
LOOSENESS IS DETECTED, DO NOT OPERATE THE CRAFT
UNTIL CORRECTED.
TOOLS REQUIRED:
1.Suitable wrench to fit nut supplied with steering shaft.
MOUNTING INSTRUCTIONS:
1.Slide steering wheel onto steering shaft, aligning key with keyway.
2.Install locknut (supplied with steering shaft).
3.Tighten nut securely with suitable wrench.
4.Align clips on cap over slots on wheel and push cap on.
CAP
STEERING SHAFT
ATTWOOD
STEERING WHEEL
LOCKNUT
CAUTION: ALWAYS CHECK TO SEE THAT THE STEERING
WHEEL IS SECURELY MOUNTED AND IS IN GOOD WORKING
ORDER BEFORE EACH
OPERATION OF THE CRAFT. IF ANY
LOOSENESS IS DETECTED, DO NOT OPERATE THE CRAFT
UNTIL CORRECTED.
 previous