502
7
LOW TEMPERATURE MODE
In Low Temperature (Sentinel) mode, system starts
your engine automatically when temperature falls
below a preset level (programmable during
installation), see table.
Engine will run for programmed runtime (see “Engine runtime”), after which system will wait 2½ hours and
then start engine again if temperature is still below preset level.
To activate/deactivate Low Temperature mode,
Option 1 •
••
• press
and buttons simultaneously.
Option 2 •
••
• press
and buttons simultaneously.
When mode is activated:
Parking lights will flash 4 times, then, if temperature is below preset level, engine will start.
If temperature is above preset level, system waits until it goes below preset level before starting. If system
cannot execute command (for example, hood is open), confirmation will be different (lights: 3).
When mode is deactivated:
Parking lights will flash twice to confirm that mode is deactivated. Applying brakes also deactivates Low
Temperature mode.
LOCK/UNLOCK COMMANDS
(Options 2 & 3)
If your vehicle is equipped with electric door locks, several functions can be operated by remote control.
These features are optional and may require purchasing additional equipment. Consult your dealer for
advice.
Following systems can be controlled:
• Door locks.
• Trunk or hatchback release.
• Interior lights.
LOCK / UNLOCK
(Options 2 & 3)
When the
command is sent, system locks or unlocks (toggle) the doors.
Upon locking: Parking lights flash once to confirm command has been received.
Upon unlocking: Parking lights flash twice to confirm command has been received.
DOME LIGHT SUPERVISION
Dome light will turn on for 30 seconds every time “Unlock” command is sent.
This 30-second period is cancelled when “Lock” command is sent, brakes are applied or key is inserted in
ignition and turned to “ON” position.
This function is optional and requires an additional connection and equipment during installation.
Threshold temperature is set for
-5 °C ( 23 °F) -20 °C ( -7 °F)
-15 °C ( 5 °F) -30 °C ( -22 °F)