Filter
Top Products
Page 8
OWNER’S GUIDE 2WAY REMOTE VEHICLE STARTER
LCD DISPLAY
TELEPHONE ICON- When the vehicle starts in Timer Mode, this icon will appear
in conjunction with the usual icons that indicate that the vehicle is running by the
remote starter.
KEY ICON- This icon will begin to flash when the remote starter button is first
pressed. After the vehicle has started this icon will stay on solid. The wheels on the
car will begin to rotate.
HORN ICON- This icon indicates that the alarm has been triggered. The remote
will start to beep and the siren icon will come on solid at the same time as the icon
for the violated zone. The remote will stop beeping after one minute. Both icons will
continue to flash until the system is disarmed.
ANTENNA ICON- This icon will be visible on the LCD whenever the remote
is within transmitting range of the vehicle. The icon will disappear when the remote
leaves that transmitting range.
STATUS ICONS These icons are located at the top of the LCD screen.
STATUS CHECK MODE This feature is used to check the status of the alarm system or
the remote starter.
1. To check the status press and release Button #4 on the remote transmitter.
2. The remote will display the icons of the active features on the LCD screen.
TRUNK ICON- This icon will be displayed on the LCD screen when the trunk
release output is activated by the remote transmitter. This icon will be displayed on
the screen until the system is armed or if the status button is pressed
BATTERY ICON- This icon is always present when the LCD screen. This icon will
indicate the current battery level for the remote transmitter. The black area of the
icon will disappear as the battery level decreases.
RUN TIMER- This icon activates during remote starting. The bar graph will count
down in 2 minute increments, indicating how much time is left on the remote starter’s
runtime.