Filter
Top Products
OWNER’S GUIDE PAGE 4
Remote Starter Functions
Remote Starting (if remote start fails to start see page 15)
1. Press and release the START button.
2. The park lights will flash and the horn (optional) will honk once to confirm.
The vehicle will then remote start, the horn (optional) will honk and the park
lights will then flash four times then remain on while the vehicle is running*.
Extended Run Time
1. While the vehicle is running with the remote starter, press and release
the START button.
2. The park lights will flash and the siren or horn (optional) will chirp one time
to confirm. The system will reset the run time.*
NOTE: Not available with 4 minute run time.
Remote Stop
1. While the vehicle is running with the remote starter, press and hold
the START button for three seconds. The remote starter will shut down.
2.The park lights will flash and the siren or horn (optional) will chirp 2 times to
confirm shutdown.
NOTE: Pressing the brake pedal or opening the hood will also shut down the
remote starter.
Idle Mode
1.While the vehicle is running with key, press and release the START button.
2.The park lights will turn on and the siren or horn (optional) will chirp twice.
3.Turn the ignition key to the “OFF” position and the vehicle will remain
running*.
*Default 15 minutes.
.