Filter
Top Products
1. Press FPL twice to reach the home page
Flight Plan Mode and press SEL, or
press SEL while in the Nav function.
2. Press ENTER to prepare to load
approach waypoints.
3. Turn the SMALL knob to display the
available approach choices.
4. Press ENTER to select the displayed
approach path.
5. Turn the SMALL knob to display the
approach legs.
6. Press NAV to return to Navigation Mode.
Approach Setup Summary
B. Load Approach Information
Load a destination airport. Load a stored
Flight Plan, or edit the active Flight Plan.
You may also use the DIRECT-TO button
to choose a destination. The destination
must be an airport that has an established
approach capability.
A. Load Destination Airport
Enroute
Within 30 nm of
Destination
IAF Active Waypoint
FAF Active Waypoint
At FAF (MAP Becomes Active)
At MAP (TO/FROM Transition)
MAHP Active Waypoint
Load Approach
Enable Approach & enter altimeter setting
(Approach annunciator turns ON)
(CDI goes to 1 nm full-scale sensitivity)
Verify Approach annunciator is ON
Verify/Set OBS/HLD: ON for Procedure Turn or Hold
OFF to sequence
Verify green Approach-Active annunciator is ON
Verify altimeter setting is entered
Verify/Set OBS/HLD: OFF to sequence to MAP
Verify Approach-Active annunciator is ON
(CDI goes to 0.3 nm full-scale sensitivity)
If NOT landing: Press OBS/HLD to cancel
Approach-Active
(Green Approach-Active annunciator turns OFF)
(Approach Annunciator remains ON)
(CDI goes to 1.0 nm full-scale sensitivity)
Verify OBS/HLD is ON
Location Action
Approach Checklist
DME-Arc Checklist
At Arc
Intercept
On Arc
Inbound Leg
Intercept
1. Verify/Set OBS/HLD ON
2. USE DME-Arc Page in NAV mode
3. Verify or select DME-Arc Reference Waypoint and follow the
prompts
4. Use Nav or Map mode and follow information
1. Use DME-Arc page in NAV mode or Map mode to navigate
2. Follow prompts for inbound leg intercept
1. Follow prompts to turn to next leg
Location
Action