Filter
Top Products
12
istered to GSM network, able to send/
and place or receive phone calls
¾ BUSY LED:
Device is reg
receive SMS
Device is dialing GPRS service. If connected, LED will
flash several times if connection to Control Base was
successful. Will repeat if not successful.
When SOS button is pressed for 2 seconds, BUSY LED
will turn on for sending data.
5. Getting Started
After closing the battery cover, the Personal Tracker will power up and
automatically attempt to register to GSM network.
rovided that your device is positioned in an area with clear un-obstructed
utomatically attempt to connect to the Control Base after 5
inutes in order to activate your user account and send first position and
o use all communication and tracking features of the device and if your
ation
an er to
The following information and device configurations can be
c User Name:
d 1, 2 bers of authorized contact persons to
Geo-Fence: You can load up to 4 restricted areas (Geo-fences) to the
device and receive alarm notifications in case of violations
P
view of the sky, the device will start scanning for GPS satellites to obtain its
first GPS lock. This first fix can take several minutes.
If your device has been preconfigured with Control Base server information,
the device will a
m
status details.
T
service plan provides these, you may modify optional account inform
d device setup parameters from the Tracking Websites. Please ref
Web or software guide to do additional accyour Tracking ount and device
configurations.
additional user
setup from the Tracking Websites (amongst others):
This name will appear to identify the device when you
receive GPS location and alarm notifications
, 3: Phone num Contact
remote control security features and receive alarm
notifications.
e