Filter
Top Products
6
Remote Control Operation
Z-2 : 10 meter wired multi-function remote controller with 5-pin XLR connector for ANTARI Fog Machine
models Z-1500 and Z-3000. Its interface allows the operator to customize fog
machine functions by adjusting fogging duration, interval and volume.
Its LCD displays current operating parameters, which are automatically stored
in non-volatile memory, allowing the machine to be powered down without losing
1 function settings.
2 3 4
Description of the elements of the Z-2:
(1) LCD-Display
5 6 7 (2) Function-key
(3) Up-key ⇑
(4) Down-key ⇓
(5) Timer-key
(6) Volume-switch
(7) Manual-key
1. Via the Function key, you can adjust the desired settings. After pressing the Function key once, the
display shows "Interval Set". Adjust the interval between each fog emission (within the range of 1 to 255
seconds) by means of the Up-/Down keys. By pressing the Function-key twice, the display shows
"Duration Set". Adjust the duration of each fog emission (within the range of 1 to 20 seconds) by means
of the Up/Down keys. Under the menus "Timer Out" and "Volume Out" you can adjust the output volume
by means of the Up/Down keys. The menu "DMX Add" refers to adjusting the DMX address for DMX
control or synchronization. Adjust the desired DMX-address by means of the Up/Down keys.
2. Press the Timer key to activate the timer function. The display shows the adjusted interval and the
device counts the seconds down to "0". After that, the fog emission is triggered at the volume adjusted
under "Timer Out". The duration depends on the settings adjusted under "Duration Set". If you wish to
deactivate the timer function, press the Timer key once more.
3. Press the Volume switch for immediate triggering of the fog emission at the volume adjusted under
"Volume Out". Press the Volume switch once more in order to stop the fog emission.
Press the Manual key for immediate triggering of the fog emission at 100 % volume. Let the Manual key
loose in order to stop the fog emission
.
Optional Remotecontrol : Z-3: Wireless remote controller