AMX 68 Automobile Alarm User Manual


 
þ
In te rior Light Il lu mi na tion Ca pa bil ity When remotely disarmed,
the alarm system turns on the interior lights for 30 seconds or until the
ignition key is turned on (requires an optional relay).
þ
Multi- Zone Pro tec tion Offers full perimeter security with separate
trigger connections for the doors, hood and trunk (may require optional
switches).
þ
Pre vi ous In tru sion Alert Audibly warns you if the alarm was
triggered while you were away.
þ
Spe cific In tru sion Iden ti fi ca tion The flashing LED identifies
which zone was triggered in your absence.
þ
Auto matic Mal func tion Over ride Automatically bypasses a
malfunctioning trigger or sensor, but monitors all other points to continue
protecting your vehicle.
þ
User Pro gram ma ble Ac tive/Pas sive Arm ing The alarm system
can be programmed to arm with the remote control or arm itself
automatically.
þ
Pas sive Arm ing In di ca tion The LED will flash rapidly to indicate
that the alarm system is in 30 second passive arming mode.
þ
Re mote Si lent Arm/Dis arm At any time, you can press button 3 on
your remote control to silently arm or disarm your system.
þ
Pro tected Valet Mode Prevents passive arming while your vehicle is
serviced or valet parked, allowing you to maintain possession of your
remote control.
þ
User Pro gram ma ble Long- Term Chirp Mut ing This feature
allows you to completely disable the siren chirps until you decide to
restore them.
þ
Auto matic Sys tem Check Automatically tests all triggers and
sensors every time you remotely arm your system.
þ
Vis ual Con fir ma tions Your vehicle's parking lights will flash on and
off to confirm remote arming, disarming and alarm activation.
3
AMX 68 Owner's Manual 12/29/97