Filter
Top Products
Packing List:
Reading t able top
Bottom p anel
2 Side p anels, lef t and right
Front/speaker p anel
Black speaker grille(S-250)
Hand-held mic (S-250)
Mic cable (S-250)
Gooseneck w/mic holder (S-250)
Amplifier (S-250)
Easy Step-By-Step Instructions
Featuring Quickfit-Exp ando-6 Connectors
for W/S-250 Tabletop Lectern Assembly
The Tabletop Lectern is designed
for easy assembly. If you have any
questions about assembling or using
your new sound system, or if you want
more information about accessories,
call AmpliVox s customer
service line.
The lectern is carefully p acked
to minimize shipping damage. If your
unit was damaged in shipping call our
toll-free customer service line or visit
our web site at http://www.ampli.com
1-800-267-5486
Reading
Table Top Panel
Bottom
Lef t Side
Right Side
How the Quickfit-Expando-6 Connectors
work.
Do not over tighten the connectors.
They will break if turned too far. T urn only
1/2 turn clockwise
to lock. The steel
Quickfit-6 exp anding dowels and the
Quickfit-Exp ando-6-Connectors lock
together for easy assembly.
3. Inspect the Pre-inst alled Quickfit
Expando-6 Connectors. Check the Top,
S peaker/Front, Left and Right Side
Panels to insure that the flat edge on the
connector is facing the outer edge of the
board. Use a phillip s screwdriver to rot ate
them, if needed.
Untightened
(unlocked)
To tighten
(to lock)
Edge of board
Edge of board
To untighten
(to unlock)
Tightened
(locked)
1. Unp ack all the pieces. Be sure to
save the p acking and the box in case
you need to return the lectern for any
reason. Check that you have all the
pieces and that they are not damaged.
2. Insert the dowel pins. W ith your
thumb(or use phillip s screwdriver to
ease insertion), push the dowel pins
into the holes in the 2 sides and the top.
Make sure the plastic collar is flush with
the wood surface.
S peaker/
Front
Panel
F:\docs\productinstructions\r-
Quickfit-6 Exp anding Dowel Pin
Hardware:
12 Quickfit-Exp ando-6 Connectors
pre-inst alled
12 Push-in Quickfit-6 Exp anding dowels
Tools Needed:
Phillip s Screwdriver - for 1/2 turn of pre-
inserted Quickfit-Exp ando-6 Connectors
The Titus fittings sup -
kit have been specially
for ease of
T urn counterclockwise to unlock