Filter
Top Products
25
450148-19 www.amdry.com 25
Illus. No. Part No. Qty. Description
13 317400 1 Impellor/Fan Shaft
14** 100802 2 Retaining Rings
15 880879 2 1-3/8” Pillow Block Bearing with Cone Point Nylon Patch Setscrew
and Grease Fitting
16 152005 2 3/8-16 Hex Nut
17 150619 2 3/8-16 x 3” Bolt
18 802175 1 Motor Mount ONLY (does not include gasket)
19 117604 5 Gasket (sold by the foot)
20 882670 1 16” Impellor (fan)
21 153050 1 1/2” Flat Washer
22 152006 2 1/2-20 Left Hand Jam Nut
23*** 100169 2 5L-350 V-Belt
(for 60 Hz gas models Only)
For Models Mfd. as of March 16, 1995
100156 2 5L-330 V-Belt
(for 50/60 Hz steam models Only)
For Models Mfd. as of March 16, 1995
100119 2 5L-320 V-Belt
(for 60 Hz gas models and 50/60 Hz steam models Only)
For Models Mfd. prior to March 16, 1995
100156 2 5L-330 V-Belt
(for 50 Hz gas models Only)
24 100706 1 5/16” x 5/16” x 1-3/8” Key
25 101138 1 SDS x 1-1/8” Bushing
26 101147 1 2B x 4.8 Pulley
(for 60 Hz gas models Only)
101177 1 2B x 5.8 Pulley
(for 50 Hz gas models Only)
101185 1 2B x 6.2 Pulley
(for 50/60 Hz steam models Only)
27* 882078 1 3 HP Motor
28 152005 4 3/8-16 Hex Nut
29 153005 4 3/8” Lock Washer
30 153004 4 3/8” Flat Washer
31 332198 1 Adjustment Plate
32 821012 1 Bolt Plate Assembly
33 116014 1 3” x 3” Fan Shaft Gasket
* Check part number on motor data label to verify correct motor.
** For some models manufactured prior to March 1, 1995.
*** Replace in matched sets (both belts).
Reversing, T.E.F.C. Motor - Drive/Fan Motor Mount Assembly (continued)
For Models Mfd. prior to August 7, 1995